Siffar
China SMT Manufacturer High Precision GKG Cikakkiyar Solder Manna Printer
1. GKG G9+ atomatik solder manna bugu inji stencil gano aikin:
Ta hanyar yin diyya ta tushen haske sama da stencil, ana amfani da CCD don bincika ramukan raga na stencil a ainihin lokacin, don ganowa da yanke hukunci da sauri ko an toshe stencil bayan tsaftacewa, da yin tsaftacewa ta atomatik, wanda shine ganowar 2D. Hanyar don allon PCB.Maimaita
2. GKG G9+ atomatik solder manna bugu inji atomatik rarraba tsarin:
Dangane da buƙatun tsarin bugu daban-daban, bayan bugu, ingantaccen rarrabawa, rarraba kwano, zanen layi, cikawa da sauran ayyukan aiki ana iya yin su akan allon PCB;a lokaci guda kuma, shugaban mai ba da wutar lantarki yana sanye da aikin dumama, wanda za'a iya amfani dashi a cikin ƙananan yanayin zafi Lokacin da manne ya yi zafi, ana inganta yawan ruwa na manne.
3. GKG G9 + nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'in nau'i na nau'in kwalban cikawa da aikin gano man fetur:
Ƙara man siyar ta atomatik a ƙayyadaddun lokuta don tabbatar da ingancin manna siyar da adadin manna siyar da ke cikin stencil.Domin tabbatar da ingancin bugu na abokan ciniki da inganta yawan aiki.Ta hanyar firikwensin, ana iya sarrafa adadin manna mai siyar a kan stencil, kuma ana iya daidaita ingancin.
Cikakken Hoton
Ƙayyadaddun bayanai
| Ayyukan inji | |
| Maimaita daidaiton matsayi | ± 10um@6 σ , CPK≥2.0 |
| Buga daidaito | ± 18um@6 σ , CPK≥2.0 |
| Bayani na NCP-CT | 7s |
| HCP-CT | 18s/pcs |
| Tsari CT | 4 min |
| Canza layin CT | 2 min |
| Sigar sarrafa Substrate | |
| Matsakaicin girman allo | 450*340mm |
| Girman allo Min | 50*50mm |
| Kaurin allo | 0.4 ~ 6 mm |
| Kewayon inji kamara | 450*340mm |
| Matsakaicin nauyin allo | 3kg |
| Fitar da allo | 2.5mm |
| Tsawon allo | 15mm ku |
| Gudun sufuri | 900± 40mm |
| (Max) Gudun sufuri | 1500mm/s max |
| Hanyar sufuri | Mataki daya |
| Hanyar watsawa | Hagu zuwa dama |
| Dama zuwa hagu | |
| A ciki da waje guda | |
| Tsarin tallafi | Magnetic pn |
| Taimako toshe | |
| Teburin sama na hannu | |
| Jirgin damp | Matsi ta atomatik |
| Matse gefe | |
| Ayyukan adsorption | |
| Siffofin bugawa | |
| Saurin bugawa | 10-200mm/s |
| Matsin bugawa | 0.5-10 kg |
| Yanayin bugawa | Daya/biyu |
| Nau'in Queegee | Roba, skeegee ruwa (kwana 45/55/60) |
| Kashe-kashe | 0-20mm |
| Sanp gudun | 0-20mm/s |
| Girman firam ɗin samfuri | 470*370mm-737*737mm (kauri 20-40mm) |
| Yanayin matsayi na ragar karfe | Matsayin Y-direction atomatik |
| Tsaftace ma'auni | |
| Tsarin tsaftacewa | Dry, rigar, vacccum, yanayi uku |
| Tsabtace saurin gudu | Haɗe-haɗe & tsaftace saƙa |
| Tsarin tsaftacewa | Nau'in fesa gefe |
| Tsaftacewa bugun jini | Ƙirƙirar atomatik |
| Matsayin tsaftacewa | Kafin tsaftacewa |
| Gudun tsaftacewa | 10-200mm/s |
| Yin amfani da ruwa mai tsaftacewa | Daidaitacce ta atomatik/da hannu |
| Tsaftace amfani da pater | Daidaitacce ta atomatik/da hannu |
| Ma'aunin hangen nesa | |
| CCD FOV | 10*8mm |
| Nau'in kamara | 130 dubu CCD kyamarar dijital |
| Tsarin kamara | Kulle sama/ƙasa tsarin gani |
| Lokacin zagayowar kamara | 100ms |
| Nau'in alamar alama | Daidaitaccen sifar alamar gaskiya |
| Zagaye, murabba'i, lu'u-lu'u, giciye | |
| Pad da profile | |
| Alamar girman | 0.1-6 mm |
| Alama lamba | Max.4pcs |
| Tsaya lamba | Max.1pc |
| Sigar inji | |
| Tushen wuta | AC 220 ± 10%, 50/60Hz 2.2KW |
| Matsin iska | 4-6kgf/cm² |
| Amfanin iska | ~ 5L/min |
| Yanayin aiki | -20°C ~+45°C |
| Yanayin yanayin aiki | 30% -60% |
| Girman injin (ba tare da hasken fure ba) | 1172(L)*1385(W)*1530(H)mm |
| Nauyin inji | 1000kg |
| Bukatun ɗaukar kayan aiki | 650kg/m² |
