Professional SMT Solution Provider

Solve any questions you have about SMT
head_banner

Wave soldering machine start-up production operation process.

Wave soldering machine start-up production operation process:

1. Turn on the flux switch, and adjust the thickness of the foam to 1/2 of the thickness of the board during foaming; when spraying, the board surface is required to be uniform, and the spray amount is appropriate, and it is generally advisable to not spray the component surface;

2. Adjust the air volume of the air knife so that the excess flux on the board drips back into the foaming tank to avoid dripping on the preheater and causing fire;

3. Turn on the transport switch and adjust the transport speed to the required value;

4. Turn on the cooling fan.


Post time: Aug-29-2022