Sebopeho
Sebopeho:
1. Ho hlomelloa ka lisebelisoa tse tloaelehileng tsa spray, preheating le welding, ts'ebetso eohle ea welding e ka phethoa sebakeng se senyenyane sa mochine.
2. Thepa e amohela mokhoa oa ho khetha oa ho solder, 'me boleng ba welding bo phahame.
3. Sebaka se senyenyane sa maoto, ho boloka sebaka sa ho kenya.
4. Ho sebelisa phetolelo ea morao-rao ea software e sebetsang, sebopeho sa mochine oa motho se na le botsoalle 'me ts'ebetso e bonolo ebile e bonolo ho e utloisisa.
5. Tlhokomelo ea nako ea sebele ea ts'ebetso ea welding le mokhoa oa ho rekota.
6. Foolproof tshebetso, ho bonolo haholoanyane ho sebelisa.The tjheseletsa consistency e ntle le kotsi boleng ea fokotseha.
7. E amohela sebōpi se tloaelehileng sa electromagnetic pump tin, se se nang likarolo tse apereng 'me ho bonolo ho se hlokomela.
Molemo:
a All ka mochini o le mong, tafoleng e ts'oanang ea XYZ e kopanyang ho feto-fetoha ha maemo le ho soasoa, ho sebetsa ka thata le ka botlalo.
b PCB board movement, fluxer nozzle le solder pitsa e tsitsitse.
c boleng bo phahameng ba soldering.
d E ka sebelisoa haufi le mohala oa tlhahiso, e bonolo bakeng sa ho etsa mohala oa tlhahiso.
e Taolo e felletseng ea PC.Likarolo tsohle li ka kenngoa ho PC 'me tsa bolokoa ho menu ea PCB, joalo ka tsela e tsamaeang, mocheso oa solder, mofuta oa flux, mofuta oa solder, mocheso oa n2 joalo-joalo, bokhoni bo botle ba ho lekola le ho fumana boleng ba solder bo bonolo.
Setšoantšo se qaqileng
Litlhaloso
| Mohlala | TYO-300 |
| Kakaretso | |
| Boemo | L1220mm * W1000mm * H1650mm (ho sa kenyelelitsoe motheo) |
| Kakaretso ea matla | 5kw |
| Tšebeliso ea matla | 1--3kw |
| Phepelo ea motlakase | mohato o le mong 220V 50HZ |
| Boima bo kahare | 380KG |
| Reuiqred moea mohloli | 3-5 Libara |
| Phallo ea moea e hlokahalang | 8-12L/min |
| Ho hlokahala khatello ea N2 | 3-4 Libara |
| Phallo e hlokahalang ea N2 | > 2 cubic metres/hora |
| E hlokehang N2 bohloeki | 》99.998% |
| Ho hloka matla | 500--800CMB/H |
| Csebapali kapa PCB | |
| Mojari | e ka sebelisoa ha ho hlokahala |
| Sebaka se seholo sa solder | L400 * W300MM（boholo bo ka etsoa ka mokhoa o ikhethileng） |
| Botenya ba PCB | 0.2mm-----6mm |
| PCB moeli | >3 limilimithara |
| Controlling & conveyor | |
| Ho laola | PC ea indasteri |
| Loading board | Bukana |
| Boto ea ho laolla | Bukana |
| Bophahamo ba ho sebetsa | 900+/-30mm |
| Kopo ea ho tsamaisa thepa | 100MM |
| Conveyor tlase clearance | 30MM |
| Tafole ya tshisinyo | |
| Motsamao oa motsamao | X, Y, Z |
| Taolo ya motsamao | Taolo ea servo |
| Ho nepahala ha boemo | +/ - 0.1 limilimithara |
| Chassis | Tšepe sebopeho tjheseletsa |
| Tsamaiso ea phallo | |
| Nozzle ea flux | jete valve |
| Bokhoni ba tanka ea Flux | 1L |
| Tanka ea metsi | lebokose la phallo |
| Preheat | |
| Preheat mokhoa | Ho futhumatsa ka tlas'a infrared |
| Matla a heater | 3kw |
| Boemo ba mocheso | 25--240c likhato |
| Spitsa e kgolohadi | |
| Nomoro ea pitsa e tloaelehileng | 1 |
| Bophahamo ba pitsa ea solder | 15kgs/sebopi |
| Mocheso oa mocheso oa solder | PID |
| Nako ea ho qhibiliha | 30--40 Metsotso |
| Mocheso o moholo oa solder | 350 C |
| Solder heater | 1.2kw |
| Smolomo o moholo | |
| Nozzle e lefifi | sebopeho sa tloaelo |
| Lisebelisoa tsa nozzle | tšepe ea motsoako |
| Nozzle e tloaelehileng e nang le lisebelisoa | Tlhophiso e tloaelehileng: likotoana tse 5 / sebōpi (bophara bo ka hare 4mm x 3pcs, 5mm, 6mm) |
| Tsamaiso ea N2 | |
| N2 heater | maemo |
| Boemo ba mocheso oa N2 | 0 - 350 C |
| Tšebeliso ea N2 | 1---2m3/h/nozzle |
