Mochini o Ikemetseng oa SMT P&P T8H
Selelekela
Lintlha tsa Sehlahisoa:
Melemo ea Sehlahisoa:
1, Kakaretso ea 10pcs ea lik'hamera: 1PC ea kh'amera e hlokomelang Mareka, 8pcs ea kh'amera e lemohang lebelo le holimo, 1PC ea kh'amera e amohelang lipikselse tse limilione tse 8, e lemoha ka mokhoa o ts'oanang, e netefatsa ka katleho lebelo le ho nepahala.Ho feta moo, kh'amera e nepahetseng e hlophisitsoe bocha joalo ka sebopeho sa postposition, sebaka se eketsehileng sa ho ts'oara li-feeder bakeng sa karolo e ka pele, ho ntlafatsa ts'ebetso ea ho beha.
2, Adopt JUKI nozzle spring buffer e kentsoeng kantle ho naha, ha ho bonolo ho theola likarolo ha u khetha le ho e beha, e loketseng ho kenya le ho tšoarella.Ho fihlela lihlopha tse 4 tsa likarolo li ka nkoa ka nako e le 'ngoe, e leng ho ntlafatsang lebelo la ho nka le ho sebetsa hantle ha mochine.
3, li-drive tsa XY li amohela li-screw tse tsoang kantle ho naha tsa TBI tse phahameng ka ho fetesisa + le tataiso e boima, boemo bo potlakileng, lerata le tlase le ho nepahala ho holimo.Phoso ea taolo e nepahetseng e ka fihla ho 0.018mm.
4, Adopt Japan Panasonic A6 letoto la AC servo motor, encoder e nepahetseng ea 23Bit, makhetlo a 8 ho feta letoto la A5.
5, Ka lipontšo tse peli tsa 17 ”, li ne li ka sebetsa ka pele le ka morao ka nako e le 'ngoe, li nolofatsa ts'ebetso, li boloka nako ea basebelisi, ha ho hlokahale ho potoloha mochini.
6, 3-karolo jarolla ka ho iketsa inputting boto mokgwa wa: boto emetse ntseng bo eketseha, boto ntseng bo eketseha, le boto emetse outputting, eo haholo fokotsa phetiso sebaka le ho eketsa palo ea boto.Boloka nako e ngata, 'me u ntlafatse ts'ebetso.
7, Fetola mokhoa oa setso oa khatello e ntle e fetohang khatello e mpe ea ho nka likaroloana, pompo ea vacuum e sebetsang hantle le e bolokang matla le tanka ea vacuum, e nang le sistimi ea morao-rao ea tšenyo ea r&d.Ho ntlafatsa haholo ts'ebetso ea ho nka likarolo, ho felisa lerata le bakoang ke khatello e ntle e fetohang khatello e mpe, ho lieha le ho fokotsa maqhubu a ho qala ha compressor ea moea, ho ntlafatsa bophelo ba moea oa compressor ka katleho.
8, E ka tšoara 70pcs ea 8mm pneumatic feeders ka nako e le 'ngoe, e bolokiloeng 38 ea sesebelisoa sa motlakase, e ka fetola mofuta oa phepelo ka tšohanyetso, hape e ka ba motsoako oa motlakase, oa pneumatic.Ho hanyetsa ka nepo 0201-5050, lifaha tsa lebone la LED, li-diode, transistor, SOP, chip QFP-256, 45mm * 45mm range QFP, BGA joalo-joalo.
9, Phetoho ea bophara ba Conveyor e amohela sebopeho sa phetisetso ea linaha tse peli ho ntlafatsa ho nepahala le ho tsitsa ha molumo oa molumo, ka katleho ho qoba bophara bo fapaneng ba lipheletsong ka bobeli kamora ho lokisa.
Tlhaloso ea Sehlahisoa:
| Nomoro ea ho fepa. | 70 (Ka pele 38, morao 32) | IC Tray No. | Tšehetsa lihlopha tse 12 |
| Mounting Heads | 8 | XYZ Drive Guide Rail | TBI High-precision height-duty straight-line guide train |
| Karolelano ea Matla | 750W | ||
| Boemo bo Nepahetseng | 0.01 limilimithara | Sistimi ea Motion Drive | Mokhanni oa Panasonic High speed DPS |
| Nozzle Buffering Range | 5.0 limilimithara | Mokhoa oa tšebetso | Nts'etsopele e ikemetseng e thehiloeng ho sistimi ea ts'ebetso ea Windows, ts'ehetso ea Windows XP, Win7 |
| Boima ba 'mele | 550KGS | ||
| Phepelo ea motlakase | 220V, 50Hz | Karolo Angle | 0 ~ 360 °, ho potoloha ho hokahaneng ho ntse ho tsamaea |
| Moea o Hatelitsoeng | 0.5-06Mpa | Mokhoa oa ho matha oa X/Y | Potlakiso e bohlale ea curve le ho theola khokahanyo ea linear |
| Ho khanna Motor | Panasonic servo motor | ||
| Tsela ea ho Fetola Tataiso ea Seporo | Manual + Automatic | Alamo ha likoahelo tse bulehileng | ho fokotseha kapa ho emisa |
| optimization optimization | Lenaneo la boiketsetso, tsoela pele ho hlahisa ka mor'a hore ho behoa ho phethoe, ha ho hlokahale hore u emele ho tsosolosa | Mokhoa oa phetisetso oa X/Y | TBI e kentsoeng kantle ho naha ea TBI e phahameng ka ho fetesisa ea "screw rod" + e kentsoeng kantle ho naha ea TBI e nang le molora o boima oa tataiso |
| Mohloli oa Vacuum oa Nozzle | Pompo ea vacuum e sebetsang hantle haholo le e bolokang matla le tanka ea vacuum | Mount Mode | Bukana.Semi-automatic, Automatic |
| Fesetere ea Ts'ebetso | Lits'oants'o tse peli tsa ts'ebetso ka pele le ka morao, moralo o nang le botho ho feta | ||
| Konopo e loketseng | Offline, reset, opereishene ea othomathike, alamo e hlakileng | Khokahano e ikemetseng | E khona ho hokela lisebelisoa tsa mats'oao ka bo eona ka bobeli |
| Max.Sebaka sa Boto ea Potoloho | 650x380mm | Mokhoa oa ho Kena ka Boto | Mehato e meraro ea ho fetisa liboto-ho hokeloa ka boiketsetso ho tloha ka letsohong le letšehali ho ea ho le letona, boemo ba phetiso ea PCB bo itekanetseng |
| XY Max.Movement Range | 750x670mm | ||
| Z Axis Max.Movement Range | 20 limilimithara | Pontšo ea Pono | 2pcs ea 17" pontšo ea taolo ea indasteri 4: 3, qeto 1280X1024 |
| Mofuta oa Lebanta Feeder | 8/12/16/24/32mm feeder, vibration feeder | Lenaneo la Mokhoa | Lenaneo la ntlha-to-point, lenaneo la pono, faele ea PCB e hokahanya ho kenya, joalo-joalo. |
| Max.Mounting Speed | 15000CPH | ||
| Karolelano ea Lebelo la ho Mounting | 12000CPH (E bonoang) | K'hamera e Tsebahalang Nomoro. | Khamera e 1 e lemohang, kh'amera e 8 e lemohang lebelo le holimo, kh'amera e le 'ngoe e nepahetseng ka ho fetesisa ea limilione tse 8. |
| Litekanyo | 1500x1280x1410mm | ||
| Applicable Mounting Range: E loketse 0201, 0402, 0603, 0805, 1206, lifaha tsa lebone la LED, diode, transistors, SOT, 45mm * 45mm range pitch pitch ≥0.3mm QFP, BGA joalo-joalo. | |||
Mantsoe a sehlooho: ho khetha le ho beha mochini, smt ho khetha le ho beha, mochini oa smt oa ho khetha le ho beha, mochini oa pcb chip mounter, smt chip mounter, pcb pick and place macchine, mochini oa smt, lisebelisoa tsa smt.
Kakaretso ea Feme:
