Umatshini wokuBuyisa iDross yeSolder TY-10S

Iimbonakalo:
1.Isebenzisa umxube okhethekileyo kunye noyilo lokwahlula, inkunkuma izondla ngokuzenzekelayo kwindawo engaphakathi yenxalenye yokuxuba.
2. Ukwahlula okuzenzekelayo kwetoti kunye nothuthu lwetoti, kwisixhobo sokuqokelelwa kwetoti kunye nothuthu.
3.Ulwelo olwahluliweyo olusulungekileyo lwetoti lugcinwe ngokuzenzekelayo kwikhabhinethi yenkcenkce, xa lufikelela kumthamo othile, inkqubo ye-alam ivula, umqhubi ufuna nje ukukhupha i-toti ecocekileyo yolwelo kwi-tray yokubumba.
4.Lo matshini akukho mfuneko yokucoca i-cabin yokucoca ukushisa okuphezulu ukuze ugweme nayiphi na ingozi yomntu.
I-5.Uzinzo lwezinga eliphezulu lokwahlula, uhlobo lomgubo lwe-ash emva kokwahlulahlula kunzima ukubona nayiphi na i-solder ngokubonakalayo.
6.Isuti yokonga amandla, ikhuselekile kunye nemfuneko ye-Econ-friendly.
7.Amandla: 100KG-120KG/8H
I-8.I-mesh yokukhusela i-heat insulation ilawula umatshini ngaphandle kweqondo lokushisa ngaphakathi kwe-45 ℃, ekhusela umqhubi ukuba enzekaliswa.

Umzimba:
Yonke itanki yensimbi engenasici, ilula ecocekileyo.
1.Amandla:220V;
2.Ukusetyenziswa kwamandla eTotol:4.3KW;
3.Amandla okuqhuba aqhelekileyo:≤1.2KW;
Ubunzima be-4.Net: 约110KG;
5.Ubungakanani:660mm(L)X480mm(W)X1000mm(H)

Inxalenye yoMbane:
1.Ulawulo lwepaneli yekhibhodi
Imitha ye-2.OmRON yeqondo lokushisa ngokuthe nkqo ibonisa ukulungiswa kweqondo lokushisa kunye nobushushu obuchanekileyo.
3.Isebenzisa i-PID + SSR yokulawula ubushushu
I-4.Isebenzisa isixhobo sokukhusela i-creepage.

Ukuxuba kunye neNkqubo yoKwahlula:
1.Isango lokutyisa: ≤10KG inkunkuma
I-2.316L ye-oven yensimbi enokuqina inokuthwala ubushushu obuphezulu kunye nomhlwa.Max.I-70kg "yetoti esezantsi" egcinwe kwi-oveni engenanto, idinga imizuzu engama-60 ukuba inyibilike xa usebenzisa umatshini.
3.Isebenzisa i-heater eyimilo engu-“U” egqunywe ngentsimbi yokufudumeza ipleyiti, ethintela ukonakala.
4.I-patent yokuxuba kunye nenkqubo yokwahlula.
5.Ukwahlula isantya: 15KG / 60mins
6.Ukuxuba iMotor: 90W 220V ITaiwan yenza i-motor
I-7.I-Tin Bar / i-ash: I-tin ecocekileyo eyohluliweyo iya kwi-cabin, xa ifikelela kwi-volum ethile, inkqubo ye-alamu ivula ukwazisa ukukhutshwa.Ixhotyiswe ngeeseti ezi-1 zokubumba.Umlotha ungena kwibhokisi yokuqokelela, ixhotyiswe ngeebhokisi ezi-2.

Indlela yokuhluza:
Isango elidinayo langaphandle: 4″.
Ukuhamba komsebenzi:

1.Ukuxuba injini
2.Inkonkxa yestroge yenkonkxa
3.Ipali yokuxuba
4.Imigqomo yothuthu
5.Ukungena kweDross
6.Ukuphuma kwetoti
7.Moldin
8.Itroli