Siffar
G5 babban madaidaici ne da kwanciyar hankali cikakken injin bugu na gani ta atomatik, ingantaccen tsari na gani, ingantaccen tsarin watsawa, dakatar da juzu'i na daidaitawa ta atomatik, daidaitaccen tsarin sarrafa allo da tsarin ƙirar firam ɗin mai kaifin baki, ƙaramin tsari, duka daidaito da daidaituwa. babban sassauci, madaidaicin bugu da ake buƙata ayyuka.
1. GKG kwazo manual gyara pre-dagawa dandamali: sauki da kuma abin dogara tsarin, low cost, dace manual gyara, iya sauri gane daidaitawa na PIN fil jacking tsawo na PCB allon tare da daban-daban kauri.
2. Hoto da tsarin hanyar gani: The uniform zobe haske da high-haske coaxial haske na iri-sabon Tantancewar hanya tsarin, tare da haske aikin da za a iya gyara steplessly, sa kowane iri Mark maki za a iya gane da kyau (ciki har da). wadanda ba daidai ba) Mark point), dace da tin-plated, jan karfe-plated, zinariya-plated, HASL, FPC da sauran nau'in PCBs na launi daban-daban.
3. Scraper tsarin: Slide dogo irin scraper tsarin, wanda inganta Gudun kwanciyar hankali da kuma dogon sabis rayuwa.
4. Tsaftacewa tsarin: Sabon nau'in shafan roba tsiri yana tabbatar da cikakken lamba tare da stencil, yana ƙara yawan tsotsa don tabbatar da cewa an kawar da ragowar solder a cikin raga, da gaske yana fahimtar ingantaccen aikin tsaftacewa ta atomatik, hanyoyin tsaftacewa guda uku. bushe da rigar injin , software na iya saita yanayin tsaftacewa da tsaftace tsawon takarda a so.
Cikakken Hoton
Ƙayyadaddun bayanai
| Ayyukan inji | |
| Maimaita daidaiton matsayi | ± 0.01mm |
| Buga daidaito | ± 0.025mm |
| Bayani na NCP-CT | 7.5s ku |
| HCP-CT | 19s/pcs |
| Tsari CT | 5 min |
| Canza layin CT | 3 min |
| Sigar sarrafa Substrate | |
| Matsakaicin girman allo | 400*340mm (Zaɓi: 530*340mm) |
| Girman allo Min | 50*50mm |
| Kaurin allo | 0.4 ~ 6 mm |
| Kewayon inji kamara | 528*340mm |
| Matsakaicin nauyin allo | 3kg |
| Fitar da allo | 2.5mm |
| Tsawon allo | 15mm ku |
| Gudun sufuri | 900± 40mm |
| (Max) Gudun sufuri | 1500mm/s max |
| Hanyar sufuri | Mataki daya |
| Hanyar watsawa | Hagu zuwa dama |
| Dama zuwa hagu | |
| A ciki da waje guda | |
| Tsarin tallafi | Magnetic fil |
| Taimako toshe | |
| Teburin sama na hannu | |
| Jirgin damp | Matsa saman ta atomatik |
| Matse gefe | |
| Ayyukan adsorption | |
| Siffofin bugawa | |
| Saurin bugawa | 10-200mm/s |
| Matsin bugawa | 0.5-10 kg |
| Yanayin bugawa | Daya/biyu |
| Nau'in Queegee | Roba, skeegee ruwa (kwana 45/55/60) |
| Kashe-kashe | 0-20mm |
| Sanp gudun | 0-20mm/s |
| Girman firam ɗin samfuri | 470*370mm-737*737mm (kauri 20-40mm) |
| Yanayin matsayi na ragar karfe | Matsayin Y-direction atomatik |
| Tsaftace ma'auni | |
| Hanyar tsaftacewa | Dry, rigar, vacccum, yanayi uku |
| Tsarin tsaftacewa | Nau'in ɗigon ruwa |
| Tsaftacewa bugun jini | Ƙirƙirar atomatik |
| Matsayin tsaftacewa | Bayan tsaftacewa |
| Gudun tsaftacewa | 10-200mm/s |
| Yin amfani da ruwa mai tsaftacewa | Daidaitacce ta atomatik/da hannu |
| Tsaftace amfani da pater | Daidaitacce ta atomatik/da hannu |
| Ma'aunin hangen nesa | |
| CCD FOV | 10*8mm |
| Nau'in kamara | 130 dubu CCD kyamarar dijital |
| Tsarin kamara | Kulle sama/ƙasa tsarin gani |
| Lokacin zagayowar kamara | 300ms |
| Nau'in alamar alama | Daidaitaccen sifar alamar gaskiya |
| Zagaye, murabba'i, lu'u-lu'u, giciye | |
| Pad da profile | |
| Alamar girman | 0.5-5 mm |
| Alama lamba | Max.4pcs |
| Tsaya lamba | Max.1pc |
| Sigar inji | |
| Tushen wuta | AC 220 ± 10%, 50/60Hz 2.2KW |
| Matsin iska | 4-6kgf/cm² |
| Amfanin iska | ~ 5L/min |
| Yanayin aiki | -20°C ~+45°C |
| Yanayin yanayin aiki | 30% -60% |
| Girman injin (ba tare da hasken fure ba) | 1140(L)*1364(W)*1404(H)mm |
| Nauyin inji | 900kg |
| Bukatun ɗaukar kayan aiki | 650kg/m² |
