Njirimara
G5 bụ a elu-nkenke na elu-nkwụsị zuru ezu akpaka visual obibi igwe, elu-mkpebi visual nhazi, elu-nkenke nnyefe usoro, kwụsịtụrụ akpaka adaptive scraper, kpomkwem osisi n'ọnọdu nhazi na smart ihuenyo etiti clamping Ọdịdị, kọmpat Ọdịdị , ma izi ezi na mgbanwe dị elu, ọrụ mbipute ziri ezi achọrọ.
1. GKG raara onwe ya nye ntuziaka ukpụhọde tupu ebuli n'elu ikpo okwu: mfe na a pụrụ ịdabere na Ọdịdị, ala na-eri, adaba ntuziaka ukpụhọde, nwere ike ngwa ngwa na-aghọta mgbanwe nke PIN pin jacking elu nke PCB mbadamba dị iche iche ọkpụrụkpụ.
2. Image na ngwa anya ụzọ usoro: The edo mgbanaka ìhè na elu-egbuke egbuke coaxial ìhè nke ika-ọhụrụ ngwa anya ụzọ usoro, ọnụ na ihie ọrụ nke nwere ike gbanwee steplessly, na-eme ka ụdị niile nke Mark isi nwere ike mara nke ọma (gụnyere gụnyere. ndị na-adịghị agbanwe agbanwe) Mark point), dabara maka tin-plated, ọla kọpa, ọla edo, HASL, FPC na ụdị PCB ndị ọzọ nke agba dị iche iche.
3. Scraper usoro: Slide ụgbọ okporo ígwè ụdị scraper usoro, nke mma na-agba ọsọ kwụsie ike na ogologo ọrụ ndụ.
4. Cleaning usoro: The ọhụrụ ụdị ihichapụ roba warara ana achi achi zuru ezu kọntaktị na stencil, enwekwu agụụ suction iji hụ na residual solder mado na ntupu na-ike tutu amama, na n'ezie na-aghọta na irè akpaka ihicha ọrụ, atọ ihicha ụdịdị nke. akọrọ na mmiri agụụ , software nwere ike ịtọ ọnọdụ ihicha na ihicha ogologo akwụkwọ na ọchịchọ.
Foto zuru ezu
Nkọwapụta
| Ịrụ ọrụ igwe | |
| Tinyegharịa izi ezi ọnọdụ | ± 0.01mm |
| Bipụta izi ezi | ± 0.025mm |
| NCP-CT | 7.5s |
| HCP-CT | 19s/pcs |
| Usoro CT | 5min |
| Gbanwee ahịrị CT | Nkeji 3 |
| Oke nhazi mkpụrụ | |
| Oke bọọdụ kacha | 400*340mm (Nhọrọ: 530*340mm) |
| Nha bọọdụ mini | 50 * 50mm |
| Ọkpụrụkpụ osisi | 0.4-6 mm |
| Igwefoto igwe nso | 528*340mm |
| Ibu bọọdụ kacha | 3kg |
| Mwepu nke bọọdụ | 2.5mm |
| Ogologo osisi | 15mm |
| Ọsọ ụgbọ njem | 900± 40mm |
| (Max) Ọsọ ụgbọ njem | 1500mm / s max |
| Ntuziaka njem | Otu ogbo |
| Ntuziaka nnyefe | Aka ekpe gaa akanri |
| Aka nri gaa n'aka ekpe | |
| N'ime na pụta otu | |
| Usoro nkwado | Ntụtụ ndọta |
| Nkwado ngọngọ | |
| Tebụlụ ntuziaka elu-ala | |
| Mmiri mmiri mmiri | Akpaaka na nchikota elu |
| Mkpọchi akụkụ | |
| Ọrụ adsorption | |
| Mpempe akwụkwọ mbipụta | |
| Bipụta ọsọ | 10-200mm / s |
| Nrụgide obibi akwụkwọ | 0,5-10kg |
| Ụdị mbipụta | Otu/ugboro abụọ |
| Ụdị Queegee | Roba, agụba squeegee (akuku 45/55/60) |
| Snap-apụ | 0-20mm |
| Ọsọ ọsọ | 0-20mm / s |
| Nha etiti ndebiri | 470*370mm-737*737mm (ọkpụrụkpụ 20-40mm) |
| Ọnọdụ ọnọdụ nke nchara ígwè | Ndokwa ntụzịaka Y akpaaka |
| Oke ihicha | |
| Usoro nhicha | Akọrọ, mmiri mmiri, oghere, ụdịdị atọ |
| Usoro nhicha | Ụdị ntapu elu |
| Na-ehicha ọrịa strok | Ọgbọ akpaaka |
| Ọnọdụ nhicha | Nhicha biputere |
| Ọsọ nhicha | 10-200mm / s |
| Nri mmiri na-ehicha | Enwere ike idozi akpaaka/iji aka |
| Na-ehicha oriri pater | Enwere ike idozi akpaaka/iji aka |
| Ihe ngosi ọhụụ | |
| CCD FOV | 10*8mm |
| Ụdị igwefoto | 130 puku CCD igwefoto dijitalụ |
| Sistemụ igwefoto | Mkpọchi elu/ala optic Ọdịdị |
| Oge okirikiri igwefoto | 300ms |
| Ụdị akara fiducial | Ụdị akara ngosi ọkọlọtọ |
| Gburugburu, square, diamond, obe | |
| Pad na profaịlụ | |
| Kaa akara nha | 0.5-5 mm |
| Kaa akara akara | Oke.4pcs |
| Anọghị nọmba | Oke.1pc |
| Oke igwe | |
| Isi iyi ike | AC 220 ± 10%, 50/60Hz 2.2KW |
| Nrụgide ikuku | 4-6kgf/cm² |
| Oriri ikuku | ~ 5 l / nkeji |
| Ọnọdụ okpomọkụ na-arụ ọrụ | -20°C ~+45°C |
| iru mmiri na-arụ ọrụ | 30%-60% |
| Akụkụ igwe (na-enweghị ọkụ ifuru) | 1140(L)*1364(W)*1404(H)mm |
| Ibu igwe | Ihe dị ka kilogram 900 |
| Achọrọ ibu ngwa ngwa | 650kg/m² |
