Sebopeho
Selection wave soldering is thekenoloji e sebetsang hantle ea ho tjheseletsa e fihlelang ho leka-lekana ho phethahetseng pakeng tsa boleng ba tjheseletsa le bokgoni ka ho laola ditekanyetso tsa ho tjheseletsa le kgetho ya dibaka tsa welding.Sengoliloeng sena se tla u tsebisa ka molao-motheo oa ts'ebetso, likarolo tsa ts'ebeliso, melemo le mehato ea ts'ebetso ea ho khetha leqhubu ka botlalo, ka sepheo sa ho fana ka kutloisiso le tataiso e felletseng.Selectional wave soldering ke theknoloji e itirisang ea welding e sebelisang molao-motheo oa ho tjheseletsa maqhubu bakeng sa welding.Leha ho le joalo, ha ho bapisoa le mokhoa o tloaelehileng oa ho tjheselletsa maqhubu, ho khetha leqhubu la ho tjheseletsa ho ka finyella welding e nepahetseng haholoanyane ka ho laola mekhoa ea ho tjheseletsa le ho khetha sebaka sa ho tjheseletsa.
Molemo:
mofuta o sebetsang ka botlalo kantle ho marang-rang, o nkang sebaka se kopaneng.
b PCB boto motsamao, fafatsa, preheating le soldering sethaleng fixation
c Boleng bo phahameng ba tjheseletsa.
d E ka behoa haufi le mohala oa tlhahiso bakeng sa mosebetsi oa welding, 'me kopano ea line e fetoha haholo..
e Taolo e felletseng ea komporo, litekanyetso li behiloe 'me li bolokoe komporong.Hlahisa lifaele tsa tlhophiso hore u li fumane habonolo le ho li boloka.
Karolo e khethehileng ea sebōpi sa tin
a Thempereichara ea tin, mocheso oa naetrojene, bophahamo ba tlhōrō ea maqhubu, tokiso ea tlhōrō ea maqhubu, joalo-joalo kaofela li ka seta ka komporo.
b Tanka e ka hare ea sebōpi sa tin e entsoe ka motsoako oa titanium 'me ha e na ho lutla.Letlapa la ho futhumatsa ka ntle le tiisa hore ho fetisoa ha mocheso o tšoanang.
c Lisebelisuoa tsa thini kaofela li hokahane le likhokahanyo tse potlakileng, ka hona ha ho na tlhoko ea ho khutlisa libopi tsa thini ha u li nkela sebaka.
d Sesebelisoa sa ho futhumatsa sa naetrojene se etsa bonnete ba hore ho na le metsi a matle a sebōpi sa tin le ho fokotsa tlhahiso ea li-oxide.
e Sebopi sa tin se na le alamo ea boemo ba mokelikeli oa thini.
Setšoantšo se qaqileng
Litlhaloso
| Mohlala | TY-450 |
| Mochini ka kakaretso | |
| Boemo ba mochini | L1350mm * W1500mm * H1650mm |
| Kakaretso ea matla a mochine | 14kw |
| Matla a ho sebetsa ka mochini | 7--10kw（ho kenyelletsa ho futhumatsa pele） |
| Matla | Karolo e meraro ea 380V 50HZ |
| Boima bo kahare | 650KG |
| Litlhoko tsa khatello ea mohloli oa moea | 3-5 Libara |
| Litlhoko tsa ho phalla ha mohloli oa moea | 8-12L/min |
| Litlhoko tsa khatello ea mohloli oa naetrojene | 3-4 Libara |
| Litlhoko tsa ho phalla ha mohloli oa naetrojene | >2k'hube/h |
| Litlhoko tsa tlhoekiso ea naetrojene | 》99.998% |
| Litlhoko tsa bophahamo ba moea oa ho ntša metsi | 300--500CMB/H |
| Liboto tsa Pallet le PCB | |
| Paletla | E ka sebelisoa ha ho hlokahala |
| Boholo ba sebaka sa welding | L450*W400MM |
| Botenya ba PCB | 0.2mm-----6mm |
| PCB boto moeli | >3 limilimithara |
| Taololingle boemo ba ho kenya | |
| Tsamaiso ea taolo | PC ea indasteri |
| Loading board | Bukana |
| Boto ea ho laolla | Bukana |
| Bophahamo ba ho sebetsa | 900+/-30mm |
| Kopo ea ho tsamaisa thepa | 80MM |
| Conveyor tlase clearance | 30MM |
| Sethala sa lipapali | |
| Motsamao oa motsamao | X, Y, Z |
| Motsamao | Taolo ea servo e koetsoeng |
| Ho beha ka nepo | +/ - 0.1 limilimithara |
| Chassis | Tšepe sebopeho tjheseletsa |
| Tsamaiso ea phallo | |
| Nozzle ea flux | Valofo ea ente |
| Bokhoni ba tanka ea Flux | 1L |
| Tanka ea metsi | tanka ea khatello |
| Karolo ea ho futhumatsa | |
| Mokhoa oa ho futhumatsa pele | Ho futhumatsa ka holimo le ka tlase ho infrared |
| Matla a ho futhumatsa | 8kw |
| Boemo ba mocheso | 25--240c |
| Karolo ea solder | |
| Standardpitsa palo | 1 |
| Bophahamo ba pitsa ea solder | 15kgs/sebopi |
| Mocheso oa mocheso oa solder | PID |
| Nako ea ho qhibiliha | 45-70 mets |
| Boholosoldermocheso | 350 C |
| Pitsa ea soldermatla | 1.2kw |
| Sho tsofalanozzle | |
| Nozzle e lefifi | sebopeho sa tloaelo |
| Lisebelisoa tsa nozzle | tšepe ea motsoako |
| Nozzle e tloaelehileng | Tlhophiso e tloaelehileng: likotoana tse 5 / sebōpi |
| Tsamaiso ea naetrojene | |
| Naetrojene e futhumetseng | Standard |
| Taolo ea PID ea naetrojene | 0 - 350 C |
| Tšebeliso ea naetrojene / tin nozzle | 1---2m3/hora/nozzle ea thini |
