JT Full-Tunnel Entire Nitrogen Wave Soldering System

Short Description:

JT Nitrogen Wave Soldering Machine

Product Detail

Product Tags

Feature

Nitrogen Closed-loop Control.
A real-time monitoring on nitrogen concentration and PID cloed-loop adjusting nitrogen flow to realize the stable PPM value.
Increase Solder Stability
By nitrogen protecting can improve the wetting of wave infiltration and promote solder penetration rate to make sure the stable quality.
Reduce Solder Defect
The tunned-based entire nitrogen wave soldering can reduce solder derect and improve production efficiency with less oxygen content.
Save Cost
The equipment maintencance cost could be decreased effectively by a closed preheating environment.

Detail Image

Specifications

Model		NXS-450	NXS-610
Parameters	Dimension (LWH)	592016201735mm	592017951735mm
	Supply Power (3 phase 5 wires)	3P5W 380V AC, 50/60Hz 100A	3P5W 380V AC, 50/60Hz 130A
	Required Initial Power	75KW	85KW
	Required Air Source Power	0.5-0.8Pma
	Total Power	60KW	73KW
	Operating Power	≤13KW	≤15KW
	Control Method	PC+PLC
Spray System	Flux Flow	10-100ml/min
	Spray Pressure	0.25MPa-0.4MPa
Preheating System	Preheating Method	Hot air/IR for option
	Speed Adjustment Mode	IR: No Hot air: Inverter
	Preheating Zone Quantity	Optional (Preheating multi zone sectional control)
	Preheating Length	2250mm (option: 1950mm)
	Temp. Range	Room Temperature~280°C
	Temp. Control Mode	PID+SSR
Soldering System	Wave Peak Operation Mode	Mechanical Pump
	Power for Heating Tube	18KW	20KW
	Pot Capacity	Approx.550KG	Approx.780KG
	Ultimate Bearing Temperature	Max: 300°C
	Ultimate Usage Temperature	Max: 280°C
	Wave Peak Driven Power	0.75KW x2	1.0KW x2
	Height Adjustment Mode	Closed loop servo control speed
	Heating Time	Approx.130min (setting 265°C)	Approx.160min (setting 265°C)
	Wave Peak Select	Dual-wave: spoiler+flat or spoiler+spoiler
	Wave Height	0~15mm
PCB Conveyor System	Conveying Speed	500-1800mm/min
	Width Range of PCB	50-450mm	50-610mm
	Length Range of PCB	120-600mm	120-1000mm
	Height of PCB Component	Top: 150mm Bottom: 8-25mm
	Conveyor Height	900±20mm
	Angle of Rail	5.5°±0.2° fixed
	Motor Rotation Mode	Sectional transmission/Control
	Conveyor Motor Power	0.75KW x3
	Conveyor Mode	fragment conveyor: chain-fingers (V+L/full V/Full L)-Chain
	Conveyor Motor Speed Adjustment	Closed-loop servo control speed
Gas Parameters	Nitrogen Source Pressure	0.5-0.8MPa
	Nitrogen Source Oxygen Content	≤10PPM
	No. of Nitrogen Flowmeter	7pcs
Others	Exhaust Fan	220VAC750W
	Diameter of Exhaust Duct	Φ200mm