TY-3T Compact AI Learning Servo Press Fit Machine for Fine Pitch Connectors and Small IGBT Modules

Short Description:

The TY-3T is a space-saving, benchtop press-fit servo press built for fine-pitch connectors, delicate pin headers and small IGBT modules where over-force is the enemy. At just 600×860×1000 mm and 600 kg, it fits on an R&D bench or a low-volume work cell while still delivering industrial-grade process control.

A Z-axis servo, precision load cell and optical linear scale form a fully closed-loop loop system with true Z-axis position feedback down to 0.005 mm and pressure accuracy below 0.1% of full scale — paired with a light 6.8 kN maximum force, this is a machine tuned for gentle, repeatable crimping on fragile parts.

Its standout feature is AI-powered pressure curve learning: the system builds a golden reference curve and monitors every run against it using four crimping methods — average sampled force, force-curve angle, height, and specified force — so out-of-spec joints are flagged immediately.

Send email to us

Product Detail

Product Tags

Feature

1.Z-axis floating press head suspends the die on contact to prevent scratching, with multi-angle rotation for irregular module shapes.

2.Two pressure monitoring units cover the whole two-stage crimp for full connector protection.

3.Stores 13 upper dies with automatic tool change, so quick changeovers between connector types.

4.400×400 mm worktable; servo-driven PCB movement.

5.Z-axis speed 0.05–30 mm/s; upper die size customizable up to 210×50×50 mm.

6.Touch-screen HMI on Windows 10 — no separate PC needed.

7.Safety light curtain, dual-start buttons and stack tower light.

8.Runs on standard AC220V 50Hz.

Detail Image

Specifications

Overall dimensions	6008601000
Maximum pressure	6.8KN
weight	600KG
workbench surface	400mm*400mm
operating system	Windows 10 system
Parameter Settings	Touch screen settings
Safety protection device	Safety light curtain
Maximum size of upper mold	210L * 50W * 50H (customizable)
PCB movement method	Servo motor drive
Z-axis speed	0.05–30 mm/s
pressure accuracy	<0.1% fs
positional accuracy	±0.01 mm
crimping upper die	Automatic tool change; stores up to 13 types of upper crimping dies simultaneously (customizable)
input power	AC 220V 50 Hz