SMT Full Automatic Nozzle Cleaning Machine TYtech-NC30

The automatic nozzle cleaning machine adopts the multi-nozzle spray cleaning method, uses fluid mechanics to break up the water, produces extremely fine water mist, forms a strong kinetic energy at the speed of sound, and sprays onto the nozzle, forming a bubble above the nozzle to be cleaned. The continuous energy field smashes the dirt on the surface and inside of the nozzle. The machine does not require any solvents and can be cleaned with industrially pure water. Cleaning: The machine is fully automatic cleaning, 30 suction nozzles can be cleaned each time, different types of suction nozzles are equipped with different fixture trays, any type of placement machine suction nozzles can be cleaned, and automatically dried with compressed air after cleaning. Inspection: Take out the jig tray and put it on a special nozzle inspection device for inspection, and you can observe the real cleanliness of the nozzle after cleaning.

Feature:

* Clean 30 suction nozzles at a time, with short cleaning time and high efficiency.

* Instead of traditional manual cleaning, it solves the problem of ultrasonic cleaning and reduces the phenomenon of patch throwing.

* Atomized water flow supersonic jet cleaning, completely solves the dirt and impurities that cannot be cleaned by ultrasonic waves.

* The cleaning will not be unclean due to the smaller and smaller nozzle aperture.

* Cleaning is more thorough, directly prolonging the life of the suction nozzle, and the cleaning rate is over 99%.

* Easy to operate, the interface can be switched between Chinese and English.

* Never use cleaning agent, only clean with environmentally friendly pure water or deionized water.

* Using touch screen control interface, the operation is simple and easy to understand.

* It is suitable for all kinds of placement machine nozzles, and the cleaning effect is more obvious for cross-shaped, I-shaped and special-shaped nozzles.